TTG – Tactical Triggerguard

Our precision CNC machined Tactical Triggerguard replaces the standard triggerguard to provide a more accessible trigger and a more ergonomic feel, eliminating the need for a gap plug. The oversized opening of the TTG allows access to the trigger with gloved hands in cold weather. The TTG is machined from a solid piece of 6061-T6 aluminum and then black hardcoat anodized for maximum durability.
 

“Rogue Knight” Bowie Fighter

From the bench of acclaimed Master Bladesmith Jason Knight of Harleyville, SC, the Rogue Knight features an 8.5” hand forged blade of virtually unbreakable L-6 high carbon tool steel.  A special heat treatment and salt bath tempering ensures that the real-world toughness and edge holding of this knife will be second to none.  The immaculate blade grinding, flawless fit and hand contoured premium ironwood handle will exceed your expectations for finish, balance and hair-splitting sharpness. The Rogue Knight is the perfect piece for the discriminating user or collector of fine tactical edged weapons.

Limited to ten serial numbered pieces-complete with leather concealment sheath by the maker.

Night Hunter Hog & Predator Hunting Light

Texas and other states allow night hunting of wild hogs and various predators. You can’t shoot what you can’t see, so Bill Wilson an avid TX hog and predator hunter developed the Night Hunter Rifle Light specifically for this purpose. Bright LED white light is activated by a rear pressure switch (momentary or constant on) and allows you to shoot a precise shot at distances out to 150 yards. Unit is easy to install with NO modification to your rifle and consists of the following:

·        Wilson Combat High Intensity Focused Beam LED Light (100 hour runtime on 3 AAAs, included)

·        Quick Detach (QD) Mounting Ring

·        Scope Accessory Rail (SAR), Scope to Light Interface Mount

Note: Recommended for “slick barrel” (front iron sights often interfere with the beam of the light) rifles only.

Practical Carry

The Practical Carry Kit was designed to fill the needs of daily carry.  The holster is born from all the best features of our time proven Practical and Tiger Shark holster designs, utilizing the very same leather polymer laminate construction, this is one tough holster.  Included are both the Paddle and the Double Loop attachment backs allowing you the freedom to customize this holster for the rigors of daily carry.  Also included with this kit is an open front magazine pouch with a double belt slot back to offer a comfortable and stable magazine carry platform.  This Kit is available in either Shark or Elephant skin offering maximum durability and beauty in one package.    

Lo-Profile Thumb Break

The Lo-Profile Thumb Break holster was designed for the person that carries all day long and demands maximum comfort and concealability, but wants the added security of a Thumb Break. This holster's pancake style design actually conforms to the shape of the waist, blending its lines to those of the person wearing it. This feature has obvious benefits for concealment, but also helps the holster feel more comfortable with less likelihood of it hanging up on objects or shifting position.

The two-belt slot design positions the holster with a slight forward cant while providing incredible stability. This carry position offers maximum comfort and concealability while allowing a very smooth draw from just about any position. The low-cut front will have you clearing leather just above the belt line.  The Thumb Break Strap was designed not only to keep the pistol secure, but to protect the rear sight and the thumb safety as well.  This makes an excellent carry holster for anyone wanting the security of a thumb break. 

Covert Carry QD

Our new Covert Carry QD was designed with Concealed Carry in mind.  The snap on attachment offers you the ability to quickly get ready for the day with as small a profile as possible.  This holster gives you all you need with nothing extra.  If your day takes you to the Post Office you can either just remove the pistol, and continue to wear the holster that will become almost invisible, or quickly remove the holster and pistol knowing how quickly you can get them on the belt and back into action.  Just like our other holsters, the Covert Carry QD is made from the highest quality leather and finished by hand.  The Covert Carry will fit any size 1911.

WTK-DSO-S                     Delta Wave, Small                                   $199.95

WTK-DSO-L                     Delta Wave, Large                                    $249.95

Based on feedback from International Special Operations Units, the Limited Edition Delta Wave folders from Wilson Tactical and our Italian collaborator, Fox Cutlery seamlessly blend together the finest available tactical knife components- precision machined G-10 handles, massive cobalt vanadium N690Co Bohler stainless steel blades and a hardened glass breaker/impact pommel with Ernest Emerson’s patented wave rapid opening device. 

The heart of the Delta Wave is the razor sharp partially serrated spear point blade, (Rockwell-C-59/60) treated with a black DLC coating for the utmost in wear and corrosion resistance, while the liners, screws, clip and locking face are hardened to resist wear over time.  An ambidextrous pocket clip and dual thumb studs are standard equipment. 

Whether you are looking for the hardest use tactical folder available or a martially influenced collectible with serious cutting performance, the Delta Wave easily fits the bill.

440CFS                        Gunsmith Frame & Slide Kit                        
$650.00

Here is your opportunity to get a slide and frame kit that is “Pre-fit”.  The preliminary fit has been done to match these slides and frames to each other and you’re ready to finish building your new 1911.  These frames have all the features that you want to build your next custom pistol.  They are all ready for our 298 Grip Safety, just blend to your taste.  Never before have we offered this combination of ready to build slide and frames, any custom project needs to start with the best foundation, here it is….

Call Us At 1-800-955-4856

The new Wilson Combat Accu-Rizer AR flattop scope mount is machined from Aluminum bar stock and hard-anodized to withstand years of service on your tactical AR type rifle. A knurled thumb screw and spring loaded, steel locking plate allows the Accu-Rizer to be easily removed in the field by hand or with tools (11/16” nut driver) with a minimal loss of zero.  Large, precisely bored 1” rings and eight, oversize hardened Torx screws ensure repeatable accuracy and securely support and protect your scope tube. A reserve Picatinny rail riser is machined into the one ring for the backup sight or device of your choice.  All these features add up to an extremely versatile mount, crafted with Wilson’s legendary attention to detail and designed to work well with most popular tactical telescopic sights.

BR-FN308            FN Bolt Rifles
$1495.00

For some time we have been building rifles for our personal use on the FN patrol action.  We have found them to be of very high quality and great foundations for building a custom rifle.  Available for immediate delivery in Black Armor Tuff wearing the exceptional black or Ghillie Green Hogue stock ready to add your favorite optics and take to the range.  These rifles have been gone over front to back with great trigger, fully bedded, fluted barrel, and scope rail base included.

Call Us At 1-800-955-4856

TR-QDSTI             Titanium Quick Detach Suppressor          
$1495.00

The Quick Detach Suppressor has the simplest attachment available today.  Press the locking ring, push over the provided flash hider, and turn until you hear the click of it locking into place.  After the original re-zero from installing the provided flash hider, there is little or no change in point of impact.  Except for the locking ring and a few internal components the entire unit is made from Titanium so the weight at the end of your muzzle is not a factor.  Combine all of these features with excellent sound suppression and you have the final piece to build your total AR15.

Call Us At 1-800-955-4856

TR-ATFH FLASH HIDER, ACCU-TAC

Our Accu-Tac AR flash hider sports a three-pronged external profile and our exclusive external accurizing flutes that improve muzzle harmonics over other blast dispersing brakes. These extensively tested features effectively dissipate flash and minimize muzzle signature but unlike many competitive AR muzzle devices, the Accu-Tac has no negative impact on accuracy. Hardened 4140 steel, fits standard, GI threaded AR barrels.

THE WILSON COMBAT® QUAD RAIL

Unlike most rail systems on the market today that focus strictly on hanging the most gadgets from your rifle, our new Quad Rail was designed for serious shooters by serious shooters.  Our unique Quad Rail gives you a more comfortable hand hold on the forend that you would expect from a custom rifle, while maintaining the four rails for accessories. The full length top and bottom rails offer 7 ¼” of usable picatinny rail, while the sides have 1 1/2” of rail for mounting lights, lasers, slings, etc… Besides the 17 ½” of usable rail, the 8 threaded ¼” x 20 tpi holes allow for maximum attachment options. It is precision CNC machined from 6005A T5 then hard anodized for maximum durability. If you demand the very best while maintaining current tactical options, the Wilson Combat Quad Rail is the one.

Carbon Removal Tool

Never before has the soldier, enthusiast, gunsmith, or armorer had access to a single tool that can remove the carbon from both the bolt tail and bolt carrier with such ease and precision. New for 2009, the CRT-15 (Carbon Removal Tool for AR-15, M-16, and M-4 type bolts and bolt carriers) will be available in March of 2009. This revolutionary tool eclipses the function of the “scraper style” tools currently in the industry by not only improving on their ability to remove carbon buildup in the bolt carrier, but surpassing them by adding the feature of quickly and accurately removing carbon buildup from the tail of the bolt. No longer must the soldier, enthusiast, gunsmith, or armorer toil with solvent and a wire brush to adequately clean the tail of the bolt. Only the CRT-15 can remove carbon properly from any bolt tail radius, (bolt tail dimensions vary between manufacturers)! The CRT-15 is the must have cleaning tool that should be in every cleaning kit of an AR-15, M-16, and M-4 owner/operator.

• Reamer-style end removes carbon from bolt carrier of the M-16 family
• Lathe-style end removes carbon from the bolt tail of the M-16 family
• Proper carbon removal ensures proper bolt operation
• Easily fits in field cleaning kits
• Lightweight compact design fits in pocket
• All steel precision manufactured
• Hardened for long lasting quality
• 100% Made in the USA
• Easy to use
• Ensures proper bolt operation
• Save time with a tool specifically designed to remove carbon from problem areas of M-16 family bolts and bolt carriers
• Compact, lightweight, and field ready
• Fewer tools to carry/transport

Flip Up Front Sight

The all-new Wilson Combat FUFS (Flip Up Front Sight) was developed from the ground up by our engineers to be the most robust flip up front sight available for your optics equipped AR platform rifle.  Entirely machined from hardened ordnance steel, the 5.2 ounce FUFS is the perfect complement to our FURS (Flip Up Rear Sight) and locks rigidly in the up or down position.  An integrally machined fence prevents accidental push-button actuation.    The FUFS is easily mounted to your .750” barrel with 2 hidden set screws and uses a standard, elevation adjustable GI front sight post.

Single-Stage Trigger Unit

Introducing the TR-TTU an all-new single-stage trigger unit that is easily user installed in any AR pattern rifle. Exclusive Wilson Combat engineering enables a durable, sub-4lb, ultra-crisp trigger pull without any fine tuning or adjustment.  Reduced, positive trigger reset guarantees a quick follow up shot on target.  The unique hammer geometry enhances reliable ignition with military and surplus ammunition of all types while a secondary rescue sear allows the TTU to meet or exceed military specifications for drop safety.  Pre-assembled, CNC machined aluminum trigger housing contains Stainless steel trigger and springs in conjunction with tool steel action parts for trouble-free installation and long lasting performance.  Designed and extensively tested by shooters for shooters, the new Tactical Trigger Unit has raised the bar for drop-in AR triggers.

Semi-Two-Stage Trigger Unit

Introducing the TR-TTU-M2, an all-new semi-two-stage trigger unit that is easily user installed in any AR pattern rifle. Exclusive Wilson Combat engineering enables a durable, sub-4lb, ultra-crisp trigger pull without any fine tuning or adjustment.  Abbreviated initial stage establishes ample sear engagement for reliable and safe "Bullet Proof" operation in extreme tactical environments. Reduced, positive trigger reset guarantees a quick follow up shot on target.  The unique hammer geometry enhances reliable ignition with military and surplus ammunition of all types while a secondary rescue sear allows the two-stage TTU to meet or exceed military specifications for drop safety.  Pre-assembled, CNC machined aluminum trigger housing contains Stainless steel trigger and springs in conjunction with tool steel action parts for trouble-free installation and long lasting performance.  Designed and extensively tested by shooters for shooters, the new Tactical Trigger Unit has raised the bar for drop-in AR triggers.