Wilson Combat 6.8 Project

"6.8 SPC was developed for better terminal effects while still having an acceptable long range trajectory. "

After a tremendous amount of research and testing by Bill Wilson and the Wilson Combat team we are excited to announce the availability of our custom AR platform rifles chambered in 6.8 SPC caliber.

The 6.8 SPC (6.8x43mm) was initially developed by MSG Steve Holland and Chris Murray a United States Army Marksmanship Unit gunsmith to offer superior downrange lethality over the 5.56 NATO/.223 Remington in an AR pattern service rifle with minimal loss of magazine capacity and a negligible increase in recoil. When built to the level of quality and precision Wilson Combat has achieved the 6.8 SPC is also capable of outstanding accuracy and reliability.

In our match-grade, Spec II chambered 16” barrels, The 6.8 SPC is capable of pushing a .277 caliber, 85gr bullet to over 2900 FPS. 110gr bullets easily achieve 2500 FPS with factory loaded ammunition. Appropriate hand loading can achieve even higher velocities and enable the use of heavier projectiles up to 130 grains, which dramatically improves terminal ballistics over a 5.56 Nato/.223 Remington at long range.

This added ballistic performance makes the 6.8 SPC perfect for home protection and SRT/SWAT teams. The 6.8 is a truly ideal hunting round for medium to heavy game and turns the AR into a serious hunting rifle.

Wilson Combat hopes to become your one stop shop for all your 6.8 SPC needs.

"I finally measured the two groups I shot (3 shots each) with the Bill Wilson Signature accuracy load precision cranked off the Dillon with the dirty, untrimmed brass. One is .380” and the other is right under .400”

I love this caliber"
Anthony L.

Article from Shotgun News (March 20, 2010)

Wilson Combat Recon 6.8SPC

Wilson Combat forged 7075 flat top upper receiver, marked 6.8 SPC II
Wilson Combat forged 7075 lower receiver
Stainless medium weight (.740” at the muzzle) match grade barrel with 4 groove / 1-11 twist, SPC II chamber, M4 feedramps, 16” or 18”
Mid-length gas system, with lo profile gas block
LMT enhanced bolt and carrier with NP3 coating
Wilson Combat quadrail - 16" Recon mid-length quadrail, 18" Recon rifle length quadrail
Wilson Combat Accu-Tac flash hider, 5/8”-24
Wilson Combat single stage TTU (tactical trigger unit) approx 4# pull
MAGPUL CTR butt stock and MOE pistol grip with tactical trigger guard
Armor Tuff polymer finish in black, green, grey or tan
One C-Products 15 round magazine
Wilson Combat nylon assault case

TR-WCR68-16 Wilson Combat Recon 6.8 SPC 16" $2,350

TR-WCR68-18 Wilson Combat Recon 6.8 SPC 18" $2,350

TR-WCR68UP16 Complete Wilson Combat Recon 6.8 SPC Upper 16” $1,025

TR-WCR68UP18 Complete Wilson Combat Recon 6.8 SPC Upper 18” $1,025

Specifications:

Recon 16”

Overall length 36 ¼”, 33 ¼” with stock collapsed
Weight 7.5lb empty with magazine

Recon 18”

Overall length 38 ¼”, 35 ¼” with stock collapsed
Weight 7.7lb empty with magazine

1” at 100yd accuracy guarantee
(3 shots/match grade ammunition)

Green Black Tan Gray

Available options:

Wilson Combat two stage TTU tactical trigger unit approx 3# pull N/C

Wilson Combat oversize bolt stop $29.95
Wilson Combat FUF flip up front sight $146.95
Wilson Combat FURS flip up rear sight $129.95
Wilson Combat FURS II flip up rear sight $179.95
Wilson Combat Accu-Rizer Scope mount, 1” or 30mm $149.95
Trijicon or Burris optics (see optics section or call for availability and price)

Ergo pistol grip N/C

Tactical Hunter Lightweight 6.8 SPC

Wilson Combat forged 7075 flat top upper receiver, marked 6.8 SPC II
Wilson Combat forged 7075 lower receiver
Stainless lightweight match grade barrel with 4 groove / 1-11 twist, SPC II chamber, M4 feedramps, 16”
Mid-length gas system, with lo profile gas block
LMT enhanced bolt and carrier with NP3 coating
Wilson Combat quadrail
Wilson Combat Accu-Tac flash hider, 5/8”-24
Wilson Combat single stage TTU (tactical trigger unit) approx 4# pull
MAGPUL CTR butt stock and MOE pistol grip with tactical trigger guard
Armor Tuff polymer finish in black, green, grey or tan
One C-Products 15 round magazine
Wilson Combat nylon assault case

TR-THL68 Tactical Hunter Lightweight 6.8 SPC $2,350

TR-THL68UP Complete Tactical Lightweight Hunter 6.8 SPC Upper $1,025

Specifications:

Overall length 36 ¼”, 33 ¼” with stock collapsed
Weight 7lb empty with magazine

1” at 100yd accuracy guarantee
(3 shots/match grade ammunition)

Green Black Tan Gray

Available options:

Wilson Combat two stage TTU tactical trigger unit approx 3# pull N/C

Wilson Combat oversize bolt stop $29.95
Wilson Combat FUF flip up front sight $146.95
Wilson Combat FURS flip up rear sight $129.95
Wilson Combat FURS II flip up rear sight $179.95
Wilson Combat Accu-Rizer Scope mount, 1” or 30mm $149.95
Trijicon or Burris optics (see optics section or call for availability and price)

Ergo pistol grip N/C

M-4T 6.8 SPC

Wilson Combat forged 7075 flat top upper receiver, marked 6.8 SPC II
Wilson Combat forged 7075 lower receiver
Stainless M4 match grade barrel with 4 groove / 1-11 twist, SPC II chamber, M4 feedramps, 16”
Carbine length gas system with lo profile gas block
LMT enhanced bolt and carrier with NP3 coating
Wilson Combat quadrail
Wilson Combat Accu-Tac flash hider, 5/8”-24
Wilson Combat single stage TTU (tactical trigger unit) approx 4# pull
MAGPUL CTR butt stock and MOE pistol grip with tactical trigger guard
Armor Tuff polymer finish in black, green, grey or tan
One C-Products 15 round magazine
Wilson Combat nylon assault case

TR-M4T68 M-4T 6.8 SPC $2,350

TR-M4T68UP Complete M-4T 6.8 SPC Upper $1,025

Specifications:

Overall length 36 ¼”, 33 ¼” with stock collapsed
Weight 7.4lb empty with magazine

1” at 100yd accuracy guarantee
(3 shots/match grade ammunition)

Green Black Tan Gray

Available options:

Wilson Combat two stage TTU tactical trigger unit approx 3# pull N/C

Wilson Combat oversize bolt stop $29.95
Wilson Combat FURS flip up rear sight $129.95
Wilson Combat FURS II flip up rear sight $179.95
Wilson Combat Accu-Rizer Scope mount, 1” or 30mm $149.95
Trijicon or Burris optics (see optics section or call for availability and price)

Ergo pistol grip N/C

Let us build your dream AR, call to discuss available options ( featured below, 11" SBR, Night Optics D-740 & titanium suppressor )

Available 6.8 accessories, components and ammunition:


C-Products 6.8 SPC magazines	PRI 6.8 SPC magazines	Silver State 6.8 SPC Ammunition
TR-CPMAG10 6.8 MAGAZINE 10 RD. Price: $19.95	TR-PRIMAG10 PRI 6.8 MAGAZINE 10 RD Price: $36.95	NW165 Silver State Armory 85gr Barnes TSX (20rd box) $23.95
TR-CPMAG15 6.8 MAGAZINE 15 RD Price: $19.95	TR-PRIMAG15 PRI 6.8 MAGAZINE 15 RD Price: $36.95	NW162 Silver State Armory 110gr Sierra Pro Hunter (20rd box) $19.50
TR-CPMAG25 6.8 MAGAZINE 25 RD Price: $19.95	TR-PRIMAG25 PRI 6.8 MAGAZINE 25 RD Price: $36.95	NW163 Silver State Armory 110gr Barnes TSX (20rd box) $27.95
		NW164 Silver State Armory 110gr Nosler Accubond (20rd box) $24.50
		NW166 Silver State Armory 115gr OTM (20rd box) $19.95
		NW161 Silver State Armory unprimed cases (small pocket) 100qty $45.95

TR-BCA-NP3-68	TR-ATFH-68	NW167
LMT 6.8SPC enhanced bolt and carrier, NP3 coated $275.00	5/8"-24 Accu-Tac 6.8 flashider $49.95	Wilson 6.8SPC ammunition case gage $33.00

TR-68RC16	TR-68RC18	TR-68THL16
RECON 16" BARREL 6.8 SPC stainless match grade medium weight barrel 4 groove / 1-11 twist with M4 feedramp barrel extension SPC II chamber muzzle threaded 5/8-24 mid-length gas system, 16” .800" from chamber to rear of gas block .750" under gas block .740" from gas block to muzzle $249.95	RECON 18" BARREL 6.8SPC stainless match grade medium weight barrel 4 groove / 1-11 twist with M4 feedramp barrel extension SPC II chamber muzzle threaded 5/8-24 mid-length gas system, 18” .800" from chamber to rear of gas block .750" under gas block .740" from gas block to muzzle $249.95	TACTICAL HUNTER LW 16" BARREL 6.8SPC stainless match grade lightweight barrel 4 groove / 1-11 twist with M4 feedramp barrel extension SPC II chamber muzzle threaded 5/8-24 mid-length gas system, 16” .640" from chamber to rear of gas block .750" under gas block .640" from gas block to muzzle $249.95

TR-68M4-16	TR-68RC16F	TR-68RC18F
M-4T 16" BARREL 6.8 SPC stainless match grade M4 contour barrel 4 groove / 1-11 twist SPC II chamber muzzle threaded 5/8-24 Carbine length gas system, 16” .800" from chamber to rear of gas block .750" under gas block .740" from gas block to muzzle $249.95	RECON 16" FLUTED BARREL 6.8 SPC stainless match grade medium weight barrel 4 groove / 1-11 twist with M4 feedramp barrel extension SPC II chamber muzzle threaded 5/8-24 mid-length gas system, 16” .800" from chamber to rear of gas block .750" under gas block .740" from gas block to muzzle $299.95	RECON 18" FLUTED BARREL 6.8SPC stainless match grade medium weight barrel 4 groove / 1-11 twist with M4 feedramp barrel extension SPC II chamber muzzle threaded 5/8-24 mid-length gas system, 18” .800" from chamber to rear of gas block .750" under gas block .740" from gas block to muzzle $299.95

6.8 In Action









6.8 LONG RANGE PERFORMANCE

6.8 SPC , 6 Shots / Two Loads , 300 Yards	6.8 SPC , 5 Shots, 500 Yards

The bullets below were recovered from 180lb. - 200lb. feral hogs, from distances of 20 to 150 yards. This clearly shows the terminal effectiveness of the 6.8 SPC cartridge.


	Barnes 85 TSX	Barnes 110 TSX	Barnes 110 TTSX	Nosler 130 Accubond